DSO1000S Series
Isolated level: 1000V CATII, 600V CATIII;
60MHz-200MHz Bandwidth Oscilloscope;
1GSa/s sample rate,1M Memory Depth, and 6000 Counts DMM with analog bargraph;
5.6 inch TFT Color LCD Display, high resolution(640*480).
- Isolated level: 1000V CATII, 600V CATIII.
- High Bandwidth 60MHz-200MHz Oscilloscope, 1GSa/s sample rate, 6000 Counts DMM with analog bargraph and data recorder.
- 1M Memory Depth.
- High Refresh Rate (2500 frames).
- Large 5.6 inch TFT Color Display, High Resolution(640*480), Dual-Window Design --More clear, More detailed.
- One-touch automatic setup optimizes the position, range, timebase, and triggering to assure a stable display of virtually any waveform.
- Easy-to-use pop-up menu with built-in multi-language help system.
- 32 Automatic Measurements.
- Waveform Math: Add, Subtract, Multiply, and Divide.
- Store and recall over.
- Automatic cursor tracking measurements.
- XY Mode.
- Built-in FFT function converts a time-domain signal into its frequency components to measure harmonic content and distortion in systems.
- Waveform Recorder to capture/replay input waveforms from CH1 and CH2 with a maximum record length of 1000 frames.
- Pass-Fail function compares a stored waveform to an unknown input.
- Average Mode for smoothing waveforms.
- Square Wave Output (2V, 1kHz) for probe adjustment.
- USB Host/Device 2.0 full-speed interface, support removeable disk, LAN Option, easy to control by PC or long-distance.
- Dimensions (mm):240(L)x165(W)x50(H), be carried easily.
Function Picture
If connect to computer, it can be used as a virtual oscilloscope |
|
Model | DSO1202S | DSO1152S | DSO1122S | DSO1062S |
Bandwidth | 200MHz | 150MHz | 120MHz | 60MHz |
Channel | 2 | |||
Real-Sample Rate | 1GSa/s | |||
Equivalent Sample Rate | 25GSa/s | |||
Record Length | 1M | |||
Rish time | ≤1.7ns/≤2.3ns/≤2.9ns/≤5.8ns | |||
Timebase Accuracy | ±50ppm | |||
Time Base Range | 2ns/div-2000s/div | |||
Video Help | -- | |||
SD Card | -- | |||
Input Impandance | 1MΩ | |||
VOLTS/DIV Range | 2mV/div~5V/div | |||
A/D Converter | 8bit | |||
Position Range |
±50V(5V/div), ±40V(2V/div~500mV/div), ±2V(200mV/div~50mV/div), ±400mV(20mV/div~2mV/div). |
|||
DC Gain Accuracy |
±3% for Normal or Average acquisition mode, 5V/div to 10mV/div; ±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div. |
|||
Bandwidth Limit | 20MHz | |||
Trigger Types | Edge, Video, Pulse, Slope, Over time, Alternative | |||
Trigger Source | CH1, CH2 | |||
Math | +,-,x,÷,FFT, Invert | |||
Cursor Measurement |
Voltage difference between cursors: △V; Time difference between cursors: △T; Reciprocal of △T in Hertz (1/ΔT); |
|||
Auto Measuerment | Frequency, Period, Mean, Pk-Pk, Cycli RMS, Minimum, Maximum, Rise time, Fall Time, +Pulse Width, -Pulse Width, Delay1-2Rise, Delay1-2Fall, +Duty, -Duty, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, Preiod Mean, Preiod RMS, FOVShoot, RPREShoot, BWIDTH, FRF, FFR, LRR, LRF, LFR, LFF | |||
The float voltage between BNC and Ground | 600V CATIII, 1000V CAT II | |||
The float voltage between each Channel | 600V CATIII, 1000V CAT II | |||
The float voltage between Multimeter and Ground | 1000V | |||
between input Ports directly | 400V CAT II | |||
Input by 10:1 probe | 600V CATIII, 1000V CAT II | |||
DMM Max. Resolution | 6,000 Counts | |||
Testing Modes | Voltage, Current, Resistance, Capacitance, Diode & Continuity | |||
Max. Input Voltage | AC: 600V, DC: 800V | |||
Max. Input Current | AC:10A , DC: 10A | |||
Max. Input Impandance | 10MΩ | |||
Display | 5.6" TFT 16K Color Display, 640*480 dots | |||
Size | 245mm x 163mm x 52mm | |||
Weight | 1.3KG(Without Package) | |||
Standard Probe | PP200x2 | PP200x2 | PP200x2 | PP80x2 |
Number | Attachments Title | Operating |
---|---|---|
1 | DSO1000S Software | Download |
2 | DSO1000S Driver | Download |
3 | DSO1062S Firmware | Download |
4 | DSO1122S Firmware | Download |
5 | DSO1152S Firmware | Download |
6 | DSO1000S Manual | Download |
7 | DSO1000S SDK(Beta) | Download |